Monel K500 Flanges

LEADING MANUFACTURER,  EXPORTER AND  SUPPLIER IN INDIA  

Monel K500 Flanges

LEADING MANUFACTURER,  EXPORTER AND  SUPPLIER IN INDIA  

Monel K500 Flanges

Sanjivini Steel Centre is one of the largest manufacturers, vendors, and stockists of Monel K500 Flanges is Sanjivini Steel Centre. We manufacture and distribute a wide range of industrial raw materials. We are a dynamic team of entrepreneurs working for a well-run company. Although Monel K500 Flanges share many characteristics with Monel 500, the former alloy has the added advantage of having higher hardness and tensile strength. In addition to the nickel-copper foundation, the Monel K500 Flange’s composition includes titanium and aluminum, both of which are highly advantageous. Actually, the alloy’s controlled heat treatment and enhanced chemical composition ensure that Ti and Al grains precipitate in the Monel K500 structure.

400 Monel Flange

Because of their low permeability, Monel K500 Flanges can be shipped without risk of leakage, even in circumstances where little breaches could be catastrophic.

At Sanjivini Steel Centre, we offer Monel K500 Flanges suitable for various industrial applications, including:

Numerous industries and applications use our Monel K500 Flanges Here are a handful of them:

  • Off-Shore Oil Drilling Companies
  • Power Generation
  •  Petrochemicals
  •  Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
Specification of Monel K500 Flanges
SpecificationASTM B564 / ASME SB564
Size Chart1/2" (15 NB) to 48" (1200NB) DN10~DN5000
StandardsANSI/ASME B16.5, B16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges, GOST Flange, ASME/ANSI B16.5/16.36/16.47A/16.47B, MSS S44, ISO70051, JISB2220, BS1560-3.1, API7S-15, API7S-43, API605, EN1092
Pressure Rating ANSIClass 150 LBS, 300 LBS, k500 LBS, 900 LBS, 1500 LBS, 2500 LBS
Pressure Calculation in DIN6Bar 10Bar 16Bar 25Bar 40Bar / PN6 PN10 PN16 PN25 PN40, PN64
UNI6Bar 10Bar 16Bar 25Bar 40Bar
EN6Bar 10Bar 16Bar 25Bar 40Bar
CoatingOil Black Paint, Anti-rust Paint, Zinc Plated, Yellow Transparent, Cold and Hot Dip Galvanized
Test CertificatesEN 10204/3.1B
Raw Materials Certificate
100% Radiography Test Report
Third Party Inspection Report, etc
Production TechniqueForged, Heat treated and machined
Connect Type/ Flange Face TypeRaised Face (RF), Ring Type Joint (RTJ), Flat Face (FF), Large Male-Female (LMF), Lap-Joint Face (LJF), Small Male-Female (SMF), Small Tongue, Large Tongue & Groove, Groove
Special design

As per your drawing

AS, ANSI, BS, DIN and JIS
15 NB (1/2") to 200 NB (8")
Equal and Reducing Configurations

TestDirect-reading Spectrograph, Hydrostatic testing machine, X-ray detector, UI trasonic flaw detector, Magnetic particle detector
EquipmentPress machine, Bending machine, Pushing Machine, electric bevelling machine, Sand-blasting machine etc
Manufacturer of

ANSI DIN, GOST, JIS, UNI, BS, AS2129, AWWA, EN, SABS, NFE etc.
BS Flange, EN Flange, API 6A Flange, ANSI Flange, ASME Flange, DIN Flange, EN1092-1 Flange, UNI Flange, JIS/ KS Flange, BS4504 Flange, GB Flange, AWWA C207 Flange, GOST Flange, PSI Flange

B.S: BS4504 , BS3293, BS1560, BS10
AS 2129: Table D; Table E; Table H
ANSI B16.5, ANSI B16.47 Series A & B, MSS SP44, ASA, API-605, AWWA, Custom Drawings
ANSI : ANSI B16.5, ANSI B16.47(API605), MSS SP44, ANSI B16.36, ANSI B16.48
ANSI B16.5, ANSI B16.47, MSS SP44, ANSI B16.36, ANSI B16.48
American standard (ANSI)
German (DIN)
British standard (BS)

DIN: DIN 2527, DIN 2566, DIN 2573, DIN 2576, DIN 2641, DIN 2642, DIN 2655, DIN 2656, DIN 2627, DIN 2628, DIN 2629, DIN 2631, DIN 2632, DIN 2633, DIN 2634, DIN 2635, DIN 2636, DIN 2637, DIN 2638
The other standard: AWWA C207; EN1092-1, GOST12820, JIS B2220; KS B1503, SABS1123; NFE29203; UNI2276

Equivalent Material Grade of Alloy K500 Flanges

STANDARDWERKSTOFF NR.UNSJISBSGOSTAFNOREN
Monel K5002.4375N05500-----

Chemical Composition of Monel K500 Flanges

GradeCMnSiSCuFeNi
Monel K5000.25 max1.5 max0.5 max0.010 max27.00 – 33.000.5 – 263.00 min

Mechanical Properties of Monel K500 Forged Flanges

ElementDensityMelting PointTensile StrengthYield Strength (0.2%Offset)Elongation
Monel K5008.44 g/cm31350 °C (2460 °F)Psi – 160000 , MPa – 1100Psi – 115000 , MPa – 79020 %
Manufacturing Standards / Pressure Rating of Monel K500 Flanges
ASME/ANSI B 16.5Blind Flange, High Hub Blind Flange, Slip on Flange, Welding Neck Flange, Socket Weld Flange, Ring Type Joint Flange, Lap Joint Flange, Threaded Flange
PRESSURE CLASS150, 300, k500, k500, 900, 1500, 2500
ASME/ANSI B 16.47Blind Flange [Series A & B],Welding Neck Flange
PRESSURE CLASS75, 150, 300, k500, k500, 900
ASME/ANSI B 16.36Slip on Flange, Threaded Flange, Welding Neck Flange,
PRESSURE CLASS300, k500, k500, 900, 1500, 2500
BS 4504 SEC 3.1Plate Flange, Loose Plate Flange, Loose Plate With Weld Neck Flange, Blank Flange, Welding Neck Flange, Hubbed Slip on Flange, Hubbed Threaded Flange, Lapped Pipe End Flange,
PRESSURE CLASSPN 2.5 TO PN 40
BS 4504[PART 1]Plate Flange, Loose Plate With Weld On Plate Collar, Blank Flange, Welding Neck Flange, Hubbed Slip-On Hubbed Threaded,
PRESSURE CLASSPN 2.5 TO PN k500
BS 1560 BOSSPlate Flange, Loose Plate With Weld On Plate Collar, Blank Flange, Welding Neck Flange, Hubbed Slip-On Hubbed Threaded,
PRESSURE CLASS150, 300, k500, k500, 900, 1500, 2500
BS10Welding Neck Flange, Plate Slip-On Flange, Screwed Boss Flange, Slip-On Boss Flange, Blind Flange
TABLED, E, F, H
DIN FLANGESDIN 2527, 2566, 2573, 2576, 2641,2642, 2655, 2656, 2627, 2628, 2629, 2631, 2632, 2633, 2634, 2635, 2636, 2637,2638, 2673
PRESSURE CLASSPN 6 TO PN 100

K500 Monel Pipe Flange Dimensions

AMERICAN SOCIETY OF MECHANICAL ENGINEERS (ASME)
  • ASME B1.20.1, Pipe Threads, General Purpose
  • ASME B16.1, Cast Iron Flanges and Flanged Fittings Classes 25, 125 and 250
  • ASME B16.5, Pipe Flanges and Flanged Fittings NPS 1/2 Through NPS 24
  • ASME B16.11, Forged Fittings, Socket Welding and Threaded
  • ASME B16.25, Buttwelding Ends
  • ASME B16.36, Orifice Flanges
  • ASME B16.47, Large Diameter Steel Flanges NPS 26 Through NPS 60
  • ASME B31.1, Power Piping
  • ASME B31.3, Process Piping
  • ASME B46.1, Surface Texture (Surface Roughness, Waviness, and Lay)

Various Types of Monel K500 Flanges

OUR PRODUCTS

GRADES AVAILBALE

Contact Info

FOR MORE DETAIL OR ANY BUSINESS ENQUIRY PLEASE FILL TO FREE CONTACT US 

91- 9820177057 | 9820663666

24/7 Support for Your Business

Info File

Company Info
Download PDF
SANJIVINI STEEL CENTRE

About Us

We specialize in exporting a premium selection of Stainless Steel, Carbon Steel, High Nickel Alloy, along with Pipes, Tubes, Fittings, Flanges, Fasteners, and more.

Corporate Address

# 113/117, Gulab Mention, 3rd Kumbharwada, Nr.Goal Deol Temple, Mumbai 400004

krish@sanjivinisteel.com

91- 9820177057 | 9820663666

Follow Us On :

© 2024 SANJIVINI STEEL CENTER Powered By YUGASMI

SANJIVINI STEEL CENTRE

About Us

We specialize in exporting a premium selection of Stainless Steel, Carbon Steel, High Nickel Alloy, along with Pipes, Tubes, Fittings, Flanges, Fasteners, and more.

© 2024 SANJIVINI STEEL CENTER Powered By YUGASMI