Nickel 201 Pipe is a commercially pure nickel alloy with minimum 99% nickel in the composition. It has similar properties of the Nickel 200 alloy but has less carbon content. The reduction of carbon content makes it good for welding and avoids intergranular corrosion. Also, the need for slug removal after welding is greatly reduced.
The Alloy 201 Seamless Pipes are wrought nickel and it has less absolute roughness and is very precise in its dimensions. The ASTM B161 UNS N02201 Welded Pipes belongs to the standard which governs the pipe ranging up to 10 inches. The wall thickness varies depending on the diameter of the pipe up to 219mm. The diameter and the wall thickness define the schedules and the pressure classes. The Nickel 201 Seamless Pipes are high temperature resistant and corrosion resistant. It is particularly resistant to alkalis. And this property makes it used in chemical industries and food processing industries.
These pipes are fitted with each other by the similar composition made fittings. The Pure Nickel 201 Pipe Sleeve is used to seal connections of the commercially pure nickel pipes. The Pure 201 Nickel Annealed Pipes are
produced through annealing process so that the strength of the pipes are improved. There are many shapes and types of the pipes available in the market. The most used is the round pipe.
The Nickel 201 Alloy Round Pipes can be seen in the heat exchangers and condensers. There are other shapes of the pipes such as the rectangular, hexagonal and square pipes. There are cold drawn and fabricated pipes available. The 2.4068 Nickel N02201 Fabricated Pipes are used specifically for applications that need specific dimension. These are often custom-made pipes. The Nickel Alloy Ni-201 Square Pipes are used in high strength applications where bending needs to be stronger. The Alloy 201 Pipes are a bit expensive than other metal pipes due to the production process and the raw material cost.
Specification Chart of Pure Nickel 201 Pipes |
ASTM B 161 ASME SB 161 / ASTM B 622 ASME SB 622 |
Dimensions |
ASME, ASTM |
Size Range |
15″ NB – 150″ NB IN |
Different Types available |
Seamless / ERW / Welded / Fabricated |
Forms Available |
Round, Hydraulic Etc |
Pipes End Types |
Plain End, Beveled End, BOE, BE, TBE, BLE, TOE, BBE, BOE, PBE, BSE, POE, Treaded |
DIN Werkstoff nr. |
2.4068 |
UNS designation |
N02201 |
EN European standards |
LC-Ni 99 |
JIS standard |
NW 2201 |
We specialize in exporting a premium selection of Stainless Steel, Carbon Steel, High Nickel Alloy, along with Pipes, Tubes, Fittings, Flanges, Fasteners, and more.
© 2024 SANJIVINI STEEL CENTER Powered By YUGASMI
About Us
We specialize in exporting a premium selection of Stainless Steel, Carbon Steel, High Nickel Alloy, along with Pipes, Tubes, Fittings, Flanges, Fasteners, and more.
© 2024 SANJIVINI STEEL CENTER Powered By YUGASMI