| 91- 9820177057 | 9820663666
|
|
|
LEADING MANUFACTURER, EXPORTER AND SUPPLIER IN INDIA
LEADING MANUFACTURER, EXPORTER AND SUPPLIER IN INDIA
Sanjivini Steel Center is recognized for having a creative and novel approach to the provision of industrial steel. It is one of the most well-known organizations that manufactures and supplies the Similar to nickel-based grade alloy 200, grade Nickel 201 round bar is also known as commercially pure wrought nickel. Although Alloy 201 Rod has qualities similar to Alloy 200, the difference between the two alloy grades is the carbon concentration. The carbon concentration of the alloy used to create these bars is much lower, with a maximum of 0.02%. The Pure Nickel 201 Flat bar’s decreased carbon concentration helps the alloy resist embrittlement.
Typically, embrittlement is induced by inter-granular carbon when exposed to settings with high temperatures, or it can be caused by welding. The ASTM B160 Nickel 201 Hex Bar produced in our facility meets the ASTM B160 specification. The low carbon nickel alloy, UNS N02201, also known as Alloy 201, is available in round, square, hexagonal, and rectangular solid sections.
These UNS N02201 Nickel Bright Bar can be manufactured using any of the following processes: hot working, cold working, or annealed rods and bars. Alloy 201 Round Bar is used when alloy grade 200 fails, such as when used at high temperatures. Because these Nickel Alloy 201 Rods are resistant to graphitization, they are ideal for high-temperature applications.
Nickel Alloy 201 Round Bar are widely used across various industries due to their versatility and excellent properties. Here are some common applications:
| Din 2.4068 Round bar size | Diameter: 3-~800mm |
|---|---|
| Nickel Alloy 201 Hex Bar size | 2-100mm A/F |
| Alloy 201 Flat bar size | Thickness: 2 -100mm |
| Width: 10 to 500mm | |
| Nickel 201 UNS N02201 Square bar size | 4 to 100mm |
| ASTM B160 201 Nickel Angle bar size (in mm) | 3*20*20~12*100*100 |
| 201 Nickel Section | 3.0 to 12.0mm thickness |
| Alloy 201 Nickel Channel Bar (in mm) | 80 x 40 to 150 x 75 section; 5.0 to 6.0 thickness |
| ASTM B160 UNS N02201 Hollow Bar (in mm) | 32 OD x 16 ID to 250 OD x 200 ID) |
| UNS N02201 Billet Size | 1/2" to 495mm Diameter |
| Nickel 201 Rectangles Size | 33 x 30mm to 295 x 1066mm |
| Nickel Alloy 201 Round Bar Finish | Cold (bright) drawn, centreless ground, hot rolled, smooth turned, peeled, slit rolled edge, hot rolled annealed, Rough Turned, Bright, Polish, Grinding, Centreless Ground & Black |
| Alloy 201 Round Bar Surface | Bright, Hot Rolled Pickled, Cold Drawn, Sand Blasting Finished, Polished, Hairline |
| Nickel 201 Round Bar Condition | Hardened & tempered, annealed |
| Grade | C | Mn | Si | S | Cu | Fe | Ni |
| Nickel 201 | 0.02 max | 0.35 max | 0.35 max | 0.01 max | 0.25 max | 0.40 max | 99.0 min |
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
| Nickel 201 | 2.4068 | N02201 | NW 2201 | NA 12 | ??-2 | – | LC-Ni 99 |
| Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| Nickel 201 | 8.9 g/cm3 | 1446 °C (2635 °F) | Psi – 67000 , MPa – 462 | Psi – 21500 , MPa – 148 | 45 % |
Mill Test Certificates, EN 10204 3.1, Chemical Reports, Mechanical Reports, PMI Test Reports, Visual Inspection Reports, Third Party Inspection Reports, NABL Approved Lab reports, Destructive Test Report, Non Destructive Test Reports
Packing In Wooden Boxes, Plastic Bags, Steel Strip Bundled, or as per Customers Requests
Sizes and Specifications other than above can be manufactured on request
FOR MORE DETAIL OR ANY BUSINESS ENQUIRY PLEASE FILL TO FREE CONTACT US
24/7 Support for Your Business
We specialize in exporting a premium selection of Stainless Steel, Carbon Steel, High Nickel Alloy, along with Pipes, Tubes, Fittings, Flanges, Fasteners, and more.
©2024 SANJIVINI STEEL CENTER Powered By YUGASMI
About Us
We specialize in exporting a premium selection of Stainless Steel, Carbon Steel, High Nickel Alloy, along with Pipes, Tubes, Fittings, Flanges, Fasteners, and more.
© 2024 SANJIVINI STEEL CENTER Powered By YUGASMI