| 91- 9820177057 | 9820663666
|
|
|
Sanjivini Steels Centre is Stainless Steel Heat Exchanger Tubes Supplier in India. We produce Stainless Steel Heat Exchanger Tubes that are designed as per the standard of national and international.
Stainless Steel Heat Exchanger Tube is a device that transfers energy in the form of heat, from one working fluid to the next, whether in solid, liquid, or gas form. It is essential for power generation, refrigeration. All heat exchanger tubes are built on the same principle i.e that a hot fluid flowing around a colder fluid will transfer its heat in the direction of cold flow. SS 304 U Bend Tubing is widely used in heat exchanger systems. It is essential in critical field’s nuclear and petrochemical machine building. Stainless Steel U Bend Tube is designed for high-temperature applications, especially hot oil systems or steam condensing. Stainless Steel Superheater Tube material has the capacity of handling pressure and temperature. Stainless steel is used in superheater sections of boilers, either in highly corrosive environments or under supercritical steam conditions.
Stainless Steel Tube Coil Heat Exchanger is commonly applied for cooling and reheating of smaller installations. From stainless steel, a straight or corrugated tube of the standard design is manufactured and it can be used in a wide range of applications with pressure up to 16 Bar G and temperatures up to 203°C. SS Fin Tube Heat Exchanger is a tube with extended outer surface area or fins to enhance the heat transfer rate from the additional area of fins. It enhances the heat transfer rate by increasing the effective heat transfer area between the tubes and surrounding fluid. The surrounding fluid of finned tubes maybe processes air or fluid.316 Stainless Steel Heat Exchanger tube is significantly known for its excellent properties and features. It provides superior corrosion resistance and excellent tensile strength to survive in severe atmospheric situations.
Stainless Steel Heat Exchanger Tube is most commonly used for heat exchanger in large chemical processes and other oil refineries, and it is well suited for higher-pressure applications. It made up of a shell with a bundle of tubes inside it. One fluid runs through the tubes, and another fluid flows over the tubes in order to transfer heat between the two fluids.
Heat Exchanger Stainless Steel is widely known in the domestic boiler market. It is incredibly resistant to corrosion, which is important when water is constantly flowing through them.
Stainless Steel Tube Coil Heat Exchanger is the most efficient due to turbulent flow on both sides. It is most efficient due to turbulent flow on both sides.
Corrugated Stainless Steel Tubing Heat Exchanger is a flexible, stainless steel tube that is used to supply natural gas and propane in residential, commercial, and industrial structures.
It has great durability and practicality and more efficient at transferring heat than smooth ones and has a number of other benefits.
Stainless Steel Shell and Tube Heat Exchanger come in a wide range of cooling capacities. It provides a combination of reliability and efficiency. It offers superior corrosion resistance, which is ideal for many lightly caustic applications like chlorinated water or cooling plant nutrient solutions. Coiling wound tubes generate a rifling effect internally which greatly improves heat transfer and adds to flow turbulence.
Stainless Steel U Tube contains water or mercury in a U-shaped tube and it is usually used to measure gas pressure. It is designed for high-temperature applications, especially steam condensing or hot oil systems.
Stainless Steel U Bend Pipe is used to put off sewer gases from making an entrance into the premises. In refinery applications, it prevents hydrocarbons and other hazardous gases from the absconding the outer surface through drains.
Stainless Steel Finned Tube is the main component of heat exchangers. It is a series of tubes where fins have been added on the outside of the tube in order to increase the contact area with the outside fluid, to exchange heat and between the fluid inside the tube and the fluid outside the tube.
|
Size |
6.35 Mm OD to 273 Mm OD |
|
Outside Diameter |
9.52 mm O.D to 50.80 mm O.D |
|
Thickness |
0.7 mm to 3.68 mm |
|
Length |
As per Customer requirement, Maximum upto 22 Meter Long. |
|
Standards |
ASTM A213, ASME SA213 |
|
Type |
Seamless Tubes, Welded Tubes |
|
Grades |
TP 304 Tube, TP 304L Tube, TP 304H, TP 316 Tube, TP 316L Tube, TP 316H, TP 316Ti Tube, TP 317L Tube, TP 321 Tube, TP 321H Tube, TP 347 Tube, TP 347H Tube, TP 202 Tube, JT 7 Tube, J4 1 Tube, TP 409 Tube, TP 409L Tube, TP 410 Tube, TP 430Ti Tube, TP 439 Tube |
|
Finishing |
It can be supplied in mechanical polished with various grits like at 80, 120, 240, 320, 400, 600 grits and mirror polished. |
|
Wall thickness in mm. |
0.5 |
0.6 |
0.7 |
0.8 |
1 |
1.2 |
1.6 |
2 |
2.6 |
3 |
3.2 |
3.6 |
|
O.D. in mm. |
Weight in kg/meter |
|
|
|
|
|
|
|
|
|
|
|
|
6 |
0.069 |
0.08 |
0.093 |
0.1 |
0.13 |
0.14 |
0.18 |
– |
– |
– |
– |
– |
|
9.52 |
0.112 |
0.13 |
0.154 |
0.17 |
0.21 |
0.25 |
0.32 |
– |
– |
– |
– |
– |
|
10 |
0.119 |
0.14 |
0.163 |
0.18 |
0.23 |
0.26 |
0.34 |
– |
– |
– |
– |
– |
|
12.7 |
0.153 |
0.18 |
0.21 |
0.24 |
0.29 |
0.35 |
0.44 |
– |
– |
– |
– |
– |
|
14 |
0.169 |
0.2 |
0.233 |
0.26 |
0.33 |
0.38 |
0.5 |
– |
– |
– |
– |
– |
|
15.87 |
0.192 |
0.23 |
0.266 |
0.3 |
0.37 |
0.44 |
0.57 |
0.694 |
– |
– |
– |
– |
|
19 |
0.231 |
0.28 |
0.32 |
0.36 |
0.45 |
0.53 |
0.7 |
0.85 |
1.066 |
1.2 |
1.264 |
– |
|
25 |
0.306 |
0.37 |
0.425 |
0.48 |
0.6 |
0.71 |
0.94 |
1.15 |
1.456 |
1.65 |
1.744 |
1.926 |
|
25.4 |
0.311 |
0.37 |
0.432 |
0.49 |
0.61 |
0.73 |
0.95 |
1.17 |
1.482 |
1.68 |
1.776 |
1.962 |
|
31.8 |
– |
– |
– |
– |
– |
0.92 |
1.21 |
1.49 |
1.898 |
2.16 |
2.288 |
2.538 |
|
38 |
– |
– |
– |
– |
– |
1.1 |
1.46 |
1.8 |
2.301 |
2.63 |
2.784 |
3.096 |
|
44.5 |
– |
– |
– |
– |
– |
1.3 |
1.72 |
2.125 |
2.724 |
3.11 |
3.304 |
3.681 |
|
50.8 |
– |
– |
– |
– |
– |
1.49 |
1.97 |
2.44 |
3.133 |
3.59 |
3.808 |
4.248 |
|
63.5 |
– |
– |
– |
– |
– |
– |
2.48 |
3.075 |
3.959 |
4.54 |
4.824 |
5.391 |
|
76.1 |
– |
– |
– |
– |
– |
– |
2.98 |
3.705 |
4.778 |
5.48 |
5.832 |
6.525 |
|
101.6 |
– |
– |
– |
– |
– |
– |
4 |
4.98 |
6 |
7 |
7872 |
8.82 |
|
Grade |
Properties |
Properties |
Properties |
|
|
Tensile Stress ≥ MPa |
Yield Strength ≥ MPa |
Elongation ≥ % |
|
T12 |
415 |
220 |
30 |
|
TP304 |
515 |
205 |
35 |
|
TP304L |
458 |
170 |
35 |
|
TP316 |
515 |
205 |
35 |
|
TP316L |
485 |
170 |
35 |
|
TP317 |
515 |
205 |
35 |
|
TP317L |
515 |
205 |
35 |
|
TP321 |
515 |
205 |
35 |
We specialize in exporting a premium selection of Stainless Steel, Carbon Steel, High Nickel Alloy, along with Pipes, Tubes, Fittings, Flanges, Fasteners, and more.
© 2024 SANJIVINI STEEL CENTER Powered By YUGASMI
About Us
We specialize in exporting a premium selection of Stainless Steel, Carbon Steel, High Nickel Alloy, along with Pipes, Tubes, Fittings, Flanges, Fasteners, and more.
© 2024 SANJIVINI STEEL CENTER Powered By YUGASMI