| 91- 9820177057 | 9820663666
|
|
|
LEADING MANUFACTURER, EXPORTER AND SUPPLIER IN INDIA
LEADING MANUFACTURER, EXPORTER AND SUPPLIER IN INDIA
Sanjivini Steel Center is the leading manufacturer, supplier, and exporter of Inconel 625 Falnges in India. Flanges created from Inconel 625 offer remarkable resistance to pitting, corrosion, and corrosion inside cracks. Sanjivini Steel Center’s Inconel UNS N06625 flanges are resistant to inclement weather both within and outside of bodies of water. The composition of Inconel 625 Flanges is 5% nickel, 20% chromium, carbon, manganese, silicon, sulfur, and carbon. Because of the high concentration of nickel and chromium they contain, these flanges are incredibly strong and long-lasting. The minimum yield strength and tensile strength of the Alloy 625 flanges are 517 MPa and 930 MPa, respectively. These are relatively stronger than conventional stainless steel flanges.
The exceptional strength of Inconel Alloy 625 Flanges and other variations is derived from their chemical compositions. Inconel N06625 flanges have a melting temperature of 1350 °C, which is likewise rather high. The strength of the flanges enables their use in high-pressure applications, and their melting temperature for their use in high-temperature operations. Inconel 625 Flanges’ durability is a result of alloying elements like molybdenum and niobium strengthening the nickel-chromium substrate.
Therefore, dispersion hardening processes are not necessary for Inconel UNS N06625 Flanges. These four components work together to give Inconel 625 Flanges exceptional resistance to a variety of corrosive environments with differing degrees of severity and high temperatures. Inconel UNS N06625 flanges are used in thrust-reverser systems, aircraft ducting systems, engine exhaust systems, spray bars, bellows, fuel and hydraulic line tubing, turbine shroud rings, heat-exchanger tubing in environmental control systems, and resistance-welded honeycomb structures for housing engine controls. The 625 Inconel Flanges that Sanjivini Steel Center makes, stocks, and sells are used in rocket thrust-chamber tubes, compressor vanes, turbine seals, and combustion system transition liners, among other things.
Numerous industries and applications use our Inconel 625 Flanges. Here are a handful of them:
| Specification | ASTM B564 / ASME SB564 |
|---|---|
| Size Chart | 1/2" (15 NB) to 48" (1200NB) DN10~DN5000 |
| Standards | ANSI/ASME B16.5, B16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges, GOST Flange, ASME/ANSI B16.5/16.36/16.47A/16.47B, MSS S44, ISO70051, JISB2220, BS1560-3.1, API7S-15, API7S-43, API605, EN1092 |
| Pressure Rating ANSI | Class 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS |
| Pressure Calculation in DIN | 6Bar 10Bar 16Bar 25Bar 40Bar / PN6 PN10 PN16 PN25 PN40, PN64 |
| UNI | 6Bar 10Bar 16Bar 25Bar 40Bar |
| EN | 6Bar 10Bar 16Bar 25Bar 40Bar |
| Coating | Oil Black Paint, Anti-rust Paint, Zinc Plated, Yellow Transparent, Cold and Hot Dip Galvanized |
| Test Certificates | EN 10204/3.1B Raw Materials Certificate 100% Radiography Test Report Third Party Inspection Report, etc |
| Production Technique | Forged, Heat treated and machined |
| Connect Type/ Flange Face Type | Raised Face (RF), Ring Type Joint (RTJ), Flat Face (FF), Large Male-Female (LMF), Lap-Joint Face (LJF), Small Male-Female (SMF), Small Tongue, Large Tongue & Groove, Groove |
| Special design | As per your drawing AS, ANSI, BS, DIN and JIS |
| Test | Direct-reading Spectrograph, Hydrostatic testing machine, X-ray detector, UI transonic flaw detector, Magnetic particle detector |
| Equipment | Press machine, Bending machine, Pushing Machine, electric bevelling machine, sandblasting machine, etc |
| Manufacturer of | ANSI DIN, GOST, JIS, UNI, BS, AS2129, AWWA, EN, SABS, NFE, etc. B.S: BS4504 , BS3293, BS1560, BS10 The other standard: AWWA C207; EN1092-1, GOST12820, JIS B2220; KS B1503, SABS1123; NFE29203; UNI2276 |
| Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2, Test Certificates certifying NACE MR0103 and NACE MR0175 | |
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
| Inconel 625 | 2.4856 | N06625 | NCF 625 | NA 21 | ХН75МБТЮ | NC22DNB4MNiCr22Mo9Nb | NiCr23Fe |
| Grade | C | Mn | Si | S | Cu | Fe | Ni | Cr |
| Inconel 625 | 0.10 max | 0.50 max | 0.50 max | 0.015max | – | 5.0 max | 58.0 min | 20.0 – 23.0 |
| Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| Inconel 625 | 8.4 g/cm3 | 1350 °C (2460 °F) | Psi – 1,35,000 , MPa – 930 | Psi – 75,000 , MPa – 517 | 42.5 % |
| ASME/ANSI B 16.5 | Blind Flange, High Hub Blind Flange, Slip on Flange, Welding Neck Flange, Socket Weld Flange, Ring Type Joint Flange, Lap Joint Flange, Threaded Flange |
| PRESSURE CLASS | 150, 300, 400, 600, 900, 1500, 2500 |
| ASME/ANSI B 16.47 | Blind Flange [Series A & B],Welding Neck Flange |
| PRESSURE CLASS | 75, 150, 300, 400, 600, 900 |
| ASME/ANSI B 16.36 | Slip-on Flange, Threaded Flange, Welding Neck Flange, |
| PRESSURE CLASS | 300, 400, 600, 900, 1500, 2500 |
| BS 4504 SEC 3.1 | Plate Flange, Loose Plate Flange, Loose Plate With Weld Neck Flange, Blank Flange, Welding Neck Flange, Hubbed Slip on Flange, Hubbed Threaded Flange, Lapped Pipe End Flange, |
| PRESSURE CLASS | PN 2.5 TO PN 40 |
| BS 4504[PART 1] | Plate Flange, Loose Plate With Weld On Plate Collar, Blank Flange, Welding Neck Flange, Hubbed Slip-On Hubbed Threaded, |
| PRESSURE CLASS | PN 2.5 TO PN 400 |
| BS 1560 BOSS | Plate Flange, Loose Plate With Weld On Plate Collar, Blank Flange, Welding Neck Flange, Hubbed Slip-On Hubbed Threaded, |
| PRESSURE CLASS | 150, 300, 400, 600, 900, 1500, 2500 |
| BS10 | Welding Neck Flange, Plate Slip-On Flange, Screwed Boss Flange, Slip-On Boss Flange, Blind Flange |
| TABLE | D, E, F, H |
| DIN FLANGES | DIN 2527, 2566, 2573, 2576, 2641, 2642, 2655, 2656, 2627, 2628, 2629, 2631, 2632, 2633, 2634, 2635, 2636, 2637, 2638, 2673 |
| PRESSURE CLASS | PN 6 TO PN 100 |
| AMERICAN SOCIETY OF MECHANICAL ENGINEERS (ASME) |
|
|---|
Mill Test Certificates, EN 10204 3.1, Chemical Reports, Mechanical Reports, PMI Test Reports, Visual Inspection Reports, Third Party Inspection Reports, NABL Approved Lab reports, Destructive Test Report, Non Destructive Test Reports
Packing In Wooden Boxes, Plastic Bags, Steel Strip Bundled, or as per Customers Requests
Sizes and Specifications other than above can be manufactured on request
FOR MORE DETAIL OR ANY BUSINESS ENQUIRY PLEASE FILL TO FREE CONTACT US
24/7 Support for Your Business
We specialize in exporting a premium selection of Stainless Steel, Carbon Steel, High Nickel Alloy, along with Pipes, Tubes, Fittings, Flanges, Fasteners, and more.
© 2024 SANJIVINI STEEL CENTER Powered By YUGASMI
About Us
We specialize in exporting a premium selection of Stainless Steel, Carbon Steel, High Nickel Alloy, along with Pipes, Tubes, Fittings, Flanges, Fasteners, and more.
© 2024 SANJIVINI STEEL CENTER Powered By YUGASMI